Wood fiber costs for US pellet manufacturers fell in the 2Q/19, while Canadian pellet producers experienced higher costs due to reduced supply of sawmill residues

Hakan Ekstrom
Typography
  • Smaller Small Medium Big Bigger
  • Default Helvetica Segoe Georgia Times

Many pellet manufacturers in North America have had to increase the usage of logs for their feedstock in 2019 because of reduced availability of lower-cost sawmill residues. This has resulted in higher total wood fiber costs and increases in the pellet feedstock price indices for both Canada and the US in the 1H/19, according to NAWFR.

Seattle, USA. In late 2018, higher demand and tighter supply of low-cost sawmill residues pushed wood fiber costs higher for pellet producers in both Canada and the US. WRI’s feedstock price indices increased during the fall of 2018 and in early 2019 to reach their highest levels in two years, according to the North American Wood Fiber Review (NAWFR). The price increase in the US was mainly due to the wet logging conditions in the southern states that began in late 2018 and intensified in the 1Q/19, which negatively affected harvesting operations and increased costs for roundwood. In the 2Q/19, the Pellet Feedstock Price Index for the US (PFPI-US) fell 2.3% q-o-q, mainly due to slightly higher usage of residual chips instead of costlier logs.

Over the past five years, pellet producers in the US South have shifted their wood fiber mixes away from costlier logs and towards lower-cost wood chips and sawdust. This has led to a considerable reduction in the total wood fiber costs for the expanding industry sector (see chart).

 

The Pellet Feedstock Price Index for Canada (PFPI-Can) increased by almost 12% qo-q in the 2Q/19. The substantial fiber price increases in Canada reflected the continuing change in fiber availability in British Columbia, where most of the Canadian pellet facilities are located. Due to the temporary and permanent closures of sawmills in British Columbia, supplies of sawdust and shavings have diminished. Although the increased volume of fiber from both forest biomass grinding and chipping is making up the difference, this material is significantly costlier than sawmill residuals.

The current higher price for exported pellets is allowing the British Columbia sector to handle the increase in fiber costs for now. However, it is likely that over the remainder of the year, fiber availability will become a concern, with the prospect of a higher PFPI-Can index in the coming winter season.


About the North American Wood Fiber Review (NAWFR): The newly revamped market report has tracked wood fiber markets in the US and Canada for over 35 years and it is the only publication that includes prices for sawlogs, pulpwood, wood chips and biomass for all major regions of North America. The 36-page quarterly report includes wood market updates for 15 regions on the continent in addition to the latest export statistics for sawlogs, lumber, wood pellets and wood chips. To learn more about the NAWFR, please go to www.WoodPrices.com


Contact Information
Wood Resources International LLC
Hakan Ekstrom
This email address is being protected from spambots. You need JavaScript enabled to view it.
www.woodprices.com


Hakan Ekstrom portraitHakan Ekstrom
Wood Resources International LLC